Cruiser Sky Lift

Product Details for the Cruiser Sky Lift

Make life easier when cleaning & maintaining your pride & joy with the Cruiser Sky Lift! This product will make even the most awkward & tricky jobs on your bike an absolute breeze.

The Cruiser Sky Lift takes our existing proven Sky Lift setup and utilizes a flat base central cradle which allows you to lift virtually all machines with exposed lower frame rails. This generally covers virtually all custom, classic & cruiser type machines.

With the ability to fit the lift to the motorcycle on your own, manoeuvre your bike around freely using its four high quality casters and have your bike at a comfortable working height using the Lift's built in hydraulic foot pump it’s easy to see why the abba Sky Lift sets the benchmark in motorcycle lifts!

In addition, you can use the same lift (with optional swing-arm cradle for sports bikes) on both cruiser/custom motorcycles as well as sports bikes. Being able to switch between both types makes the abba sky lift arguably the most versatile motorcycle lift on the planet!

With all these advantages and many more, not to mention our 25+ years of highly regarded backup and customer service it’s easy to see why the abba Sky Lift is the straight forward choice as the ultimate accessory for your motorcycle.

Optional bracket kit can be purchased for machines that do not have flat lower frame rails see here

• Max lifting capacity 350kgs

Design Registration No. 002569491

Take the back ache out of working on your bike with the abba Cruiser Sky Lift.

key Features of the cruiser sky lift at a Glance

• One person, quick and simple operation.
• Takes up considerably less space and allows far more access than a workbench/table.
• Allows you to reach virtually every component on a motorcycle at a comfortable working height.
• Eliminates flat spots on tyres - perfect for long term winter storage.
• Off loads suspension front and rear.
• Fully manoeuvrable, push your bike into the corner of the garage and wheel back out when work needs to be done!
• The bike can be locked off at 4 separate height positions for additional safety. (No load on hydraulic pump)
• Made with thick gauge and high grade materials for ultimate safety and longevity. The abba Sky Lift is built to last!
• Switch between the Cruiser Sky Lift and our original Sky Lift in seconds by removing just one bolt (Note: Requires the purchase of both central cradles).
• Cruiser Sky Lift Cradle has holes on either side to anchor a support strap over the bike for extra stability. This can been seen in several of our photos.
• All abba products are designed & developed in the UK at our headquarters in Essex by skilled engineers with over 30 years experience in the motorcycle industry.
• Made to the highest standards and all backed up with a full guarantee for peace of mind.
• Design Registration No. 002569491

• Sky Cruiser Lift

  Product demonstration of the abba Cruiser Sky Lift

Frequently Asked Questions for the abba cruiser Sky lift

1. How do I Know if the Lift fits my bike?
   
   The lifting cradle will generally lift all models that have exposed lower frame rails. IE: The frame rails are the lowest part of the bike. The lifting area dimensions are 450mm x 430mm. The lowest height setting is 130mm. This means the distance between ground level and the bottom of the frame rails needs to be 130mm or more (Optional lowering kit available, see question 4). As always if you are in any doubt feel free to contact us first using the "ask us" form.
2. Do I need to modify my bike?
   
   Absolutely not! Your bike will stay totally standard, no modifications or parts to be fitted ensuring your bike stays looking original, and you do not invalidate any Manufacturer warranty.
3. What is the maximum weight the Cruiser Sky Lift can take?
   
   The maximum weight the Cruiser Sky Lift can accommodate is 350Kgs.
4. What is the maximum & minimum height of the Cruiser Sky Lift?
   
   The maximum height of the lifting platform is 620mm. The minimum height is 130mm. We do have an optional "Lower Leg" for the Sky Lift which will lower the minimum height of the lifting platform to around 100mm, please contact us about this.
5. I already have your abba Sky Lift, is it possible to convert my existing lift to the cruiser version.
   
   Yes the central cradle is available to purchase separately on its own. The two central sections can be interchanged in seconds by the removal of just one bolt.
6. Is it safe to leave my bike on the abba Cruiser Sky Lift - i.e winter storage?
   
   Of course! That's what the lift is designed for, you can leave your bike on the Sky Lift indefinitely. In fact if you do not use your bike for one day or one year the Lift will keep your bike safe, upright, prevent unnecessary flat spots on tyres and compression on shock/fork springs.
7. I can see in some of your photos there is an additional strap over the bike, what is the purpose of this?
   
   Yes, if you want to give additional stability to the motorcycle on the lift it is possible to place a ratchet strap over the bike. This may be useful for moving the bike around at height or on a slightly uneven floor. The Cruiser Sky Lift cradle has holes on either side to hook the strap into. These holes can be seen in some of the product photos.
8. Is the Sky Lift suitable for exterior use and lifting my bike for general washing and cleaning?
   
   All parts of the Sky lift are either zinc plated or powder coated. There is no issue's with using the product outside or washing your bike while its up on the Lift. The hydraulic pump cylinder is a bar steel finish so we advise this is wiped dry after washing your bike. If you intend to leave your bike on the Sky Lift outside for longer periods (like winter storage) we recommend removing the hydraulic pump from the lift during this long period. Due to the pressure load generated on the main lifting shaft by the roller guides, some areas of the shaft will mark/loose some of the paint finish. This has no effect on the longevity of the product and is purely cosmetic. If you are concerned a smear of light oil on the effected area would suffice.
9. On my bike the exhaust/engine hangs lower than the bikes lower frame rails, is there anyway around this?
   
   Yes, we have available an optional bracket kit which can be added to the Cruiser Sky Lift. This will allow you to lift the bike up on the frame rails while avoiding any lower hanging parts - e.g: Engine Sump, Exhausts etc. Please contact us if you would like more information on this product.
10. Do I have to store the bike at the highest lifting position?
    
    No, the lift has four locking positions (to release all pressure off hydraulic pump) that will enable you to store your bike at various heights, from just a few inches off the ground all the way up to maximum height!
11. Will the Cruiser Sky Lift raise the bike at different angles like your superbike Sky Lift?
    
    Unfortunately not, the Cruiser Sky Lift will only lift in the horizontal position. This will still give you access to both wheels, forks, yokes, shock etc.
12. Can the Cruiser Sky Lift be stored easily when not in use?
    
    Absolutely! When not in use the lift takes up very little space at all. If required the Sky Lift can be dismantled down within seconds and will even fit in the boot of your car.
13. Will I need any special tools for assembly?
    
    No. Assembly is very straight forward, you will just require a pair of adjustable wrenches or a socket/spanner set to tighten up 3 bolts sizes. (Socket/spanner sizes would need to be 19mm & 22mm & 24mm)
14. How long does assembly and fitting take?
    
    When you first receive your Sky Lift some very basic assembly is required. Assembly takes around 15 minutes to complete. Once assembled the Sky Lift can be fitted to the bike with both wheels raised off the ground in a matter of seconds, to raise the bike to its very highest point will take an extra minute.
15. How long does it take to raise the bike to maximum height?
    
    All new Sky Lifts sold come with our 3rd generation hydraulic pump which is foot operated. You can raise the bike so both wheels are off the ground in just a few seconds. To raise your bike from its resting point to maximum height only takes around 35 seconds. Lowering the bike to the ground takes a mere 5 seconds.
16. How much does the Sky Lift weigh?
    
    The net weight of the Sky Lift is 39 kgs.
17. Will the Sky Lift Tool Tray fit the Cruiser Sky Lift?
    
    Yes. It will fit on either side of the central cradle & on all 3 lower support legs.
18. Does the abba Cruiser Sky Lift come with a guarantee?
    
    Absolutely! As with all abba products, and to give you complete peace of mind, we offer a full no quibble 3 year guarantee. As we do not manufacture the hydraulic pump in house the guarantee on this component is the manufactures standard 1 year guarantee.
19. Is everything I need included?
    
    With the exception of a bike, yes! You will receive the full Cruiser Sky Lift with wheels, foot operated hydraulic pump and instructions.
20. I am worried about the reliability of the Hydraulic pump?
    
    We understand that purchasing anything hydraulic or electrical can have more reliability issues than something without. As the Hydraulic unit on our Sky Lift is capable of lifting 3 Ton, and bearing in mind most bikes we are lifting are under 300KG the unit is only being used at 10% of its capability. During extensive testing we have found the pumps to be extremely reliable. Remember, we only use the hydraulic unit for lifting and lowering. The bikes weight is not supported on the hydraulic unit for any length of time.
21. Should something go wrong years down the line with the lift or hydraulic pump, what can be done?
    
    In the unlikely event you do have problems with your hydraulic pump, most parts including seal kits are available at low cost direct from us. We also sell the hydraulic unit at a "cost price" to existing customers, should the worst happen years down the line ensuring your lift will always be fully safe and functional. Unlike many products sold by other companies that have no parts back up, we can supply any part of the Sky lift on its own down to the last nut bolt and washer!
22. How quick is Shipping?
    
     For full shipping information please see our Shipping information page.
23. How can I obtain the product instructions?
    
    We have a page dedicated to product instructions this can also be found with other customer information under the "support tab" above.
24. 
    Design Registration No. 002569491

Got a Question about the abba Cruiser Sky Lift?

If you would like to ask us a question about the abba Cruiser Sky Lift, simply fill in the form below and we will contact you within two working days.

For a faster response, during office hours, please phone 0044 1245 322331.

Please note fields marked with * are required.